The Sanishower 1043/2 Waste Water Pump is designed for use with a shower cubicle and wash basin. Ideal for basement conversions, the Sanishower will take waste water from a shower unit and wash basin. Sanishower will pump away the waste water from showers discharging up to 15 litres per minute and can be concealed beneath a shower tray.
It offers an easy way to install a shower enclosure in a basement or loft conversion for example.
· SANISHOWER 1043/2
· Manufactured by Saniflo
· Takes waste water from washbasin & Shower
· Motor@ induction motor (no carbon brushes or gears to wear out). Tested over 30,000 cycles.
· Watts (Consumption): 250w
· Electrical Supply: 220-240V 50Hz
· Flow rate at max head l/min: 40
· Horizontal Discharge: 40 metres
· Vertical Discharge: 4 metres
· Gravity fall on horizontal installations: 1:100
· Discharge Pipe Diameter: 22mm
· Materials: Polypropylene, C.R.P., stainless steel, Neoprene
· Type of WC Pan (not included): n/a
· Motor RPM: 2800 RPM
· Dimensions (vertical height is measured from floor level): 165W x 296H x 145D
· 2 year warranty
Technote:
Sanishower will pump away the waste from showers discharging up to 15 litres per minute. Sanishower is suitable only for pumping away waste water from a shower or wash basin. For hot pumped soapy waste water (eg washing machine etc) use a Sanivite or if it is for a commercial application Sanispeed or Sanicom. Sanivite, Sanispeed and Sanicom are specifically designed for accepting hot soapy waste water pumped from washing machines, dishwashers or other applicances.
