The Sanipro XR Macerator Pump is an ideal device to be installed an ensuite bathroom where no drain is present. it is particularly suitable for adding an en suite shower room in a location where traditional plumbing would not allow it such as a basement bathroom.
Sanipro is designed to use with a WC, shower and wash basin. With its modern design and silent technology, the Sanipro can pump waste quickly and quietly through 22mm small bore pipework to a remote soil stack or sewer.
· SANIPRO 1006
· Manufactured by Saniflo
· Takes waste from a single WC, washbasin, shower, power shower, hydromassgae & bidet
· Motor: induction motor (no carbon brushes or gears to wear out). Tested over 30,000 cycles.
· Watts (Consumption): 400w
· Electrical Supply: 220-240V 50Hz
· Flow rate at max head l/min: 55
· Horizontal Discharge: 100 metres
· Vertical Discharge: 5 metres
· Gravity fall on horizontal installations: 1/200
· Discharge Pipe Diameter: 22mm
· Materials: Polypropylene, C.R.P., stainless steel, Neoprene
· Type of WC Pan (not included): Short spigot 100mm HO outlet (BS EN 33/37)
· Motor RPM: 2800 RPM
· Normal Running Time WC: 10–20 secs approx or as required, to discharge shower etc
· Dimensions (vertical height is measured from floor level) 413W x 305 O/H x 200D (requires 210mm behind spigot)
· 2 year warranty
Technote:
Designed to fit BS EN 33/37 WC pans. As close coupled cistern dimensions vary, it may be necessary, with certain designs, to utilise a spacer between cistern and wall
