Welcom to more save!

Grey Water Pumps

Grid List

Set Ascending Direction

4 Item(s)

  1. test
    NZ$10.00
    test Learn More
  2. Sanishower 1043 Shower System

    Regular Price: NZ$1,800.00

    Special Price NZ$1,116.00

    The Sanishower 1043/2 Waste Water Pump is designed for use with a shower cubicle and wash basin. Ideal for basement conversions, the Sanishower will take waste water from a shower unit and wash basin. Sanishower will pump away the waste water from showers discharging up to 15 litres per minute and can be concealed beneath a shower tray. It offers an easy way to install a shower enclosure in a basement or loft conversion for example. · SANISHOWER 1043/2 · Manufactured by Saniflo · Takes waste water from washbasin & Shower · Motor@ induction motor (no carbon brushes or gears to wear out). Tested over 30,000 cycles. · Watts (Consumption): 250w · Electrical Supply: 220-240V 50Hz · Flow rate at max head l/min: 40 · Horizontal Discharge: 40 metres · Vertical Discharge: 4 metres · Gravity fall on horizontal installations: 1:100 · Discharge Pipe Diameter: 22mm · Materials: Polypropylene, C.R.P., stainless steel, Neoprene · Type of WC Pan (not included): n/a · Motor RPM: 2800 RPM · Dimensions (vertical height is measured from floor level): 165W x 296H x 145D · 2 year warranty Technote: Sanishower will pump away the waste from showers discharging up to 15 litres per minute. Sanishower is suitable only for pumping away waste water from a shower or wash basin. For hot pumped soapy waste water (eg washing machine etc) use a Sanivite or if it is for a commercial application Sanispeed or Sanicom. Sanivite, Sanispeed and Sanicom are specifically designed for accepting hot soapy waste water pumped from washing machines, dishwashers or other applicances. Learn More
  3. Sanispeed 1045 Commercial Pump

    Regular Price: NZ$2,000.00

    Special Price NZ$1,300.00

    The Sanispeed 1045 Commercial Pump is ideal for serveries, bars, canteens, coffee stations, hotels, cafes, laundries, nursing homes, guest houses, pubs, shops and restaurants The Sanispeed unit can clear waste from a washbasin, bath, shower, power shower, washing machine, dishwasher, sink & glass washer in a light commercial situation and is supplied with floor fixing lugs to prevent it from moving during use. · SANISPEED 1045 · Manufactured by Saniflo · Watts (Consumption): 450 watts · Horizontal Discharge: max 70m · Vertical Discharge: 7 metres · Gravity fall on horizontal installations: 1/100 · Discharge Pipe Diameter: 32mm · Working Temperature: 35oC · Maximum Temperature: 60oC for short periods · Materials: polyethylene - grey · Dimensions (vertical height is measured from floor level): w373mm h350mm d185mm · Technote: When used with a shower or bath, the shower tray or bath outlet has to be raised 15 cm above the floor. · European Standard: EN 12050-2 · Alarm: no · Maintenance: Access to motor by unclipping the lid. · 2 year warranty Note: When used with a shower, the shower tray has to be raised 15 cm above the floor Learn More
  4. sanivite

    Regular Price: NZ$1,600.00

    Special Price NZ$1,040.00

    The SANIVITE designed to allow an extra kitchen or utility room to be installed where no drain is present. it has been specially designed for use with hot soapy water such as the kitchen waster. The Sanivite Pump can also be used to connect a sink, washing machine, glass washer, bath, shower, dishwasher or basin. It uses 32 mm pipework, pumps waste water away with a vertical pumping capacity of 5m, horizontal discharge of 50 m or a lesser combination of both. Its unique design reduces the noise level when in operations. Sanivite has also recently been remodelled to give greater sound reduction. · SANIVITE 1004 · Manufactured by Saniflo · Takes waste from Washbasin, Bath, Shower, Power Shower, Washing Machine, Dishwasher & Sink · Motor: induction motor (no carbon brushes or gears to wear out). Tested over 30,000 cycles. · Watts (Consumption): 360w · Electrical Supply: 220-240V 50Hz · Flow rate at max head l/min: 50 · Horizontal Discharge: 50 metres · Vertical Discharge: 5 metres · Gravity fall on horizontal installations: 1:100 · Discharge Pipe Diameter: 32mm · Working Temperature: 35oC · Maximum Temperature: 60oC · Materials: Polypropylene, C.R.P., stainless steel, Neoprene · Motor RPM: 2800 RPM · Dimensions (vertical height is measured from floor level): 373W x 350 O/H x 185D · 2 year warranty Technote: When used with a shower or bath, the shower tray or bath outlet has to be raised 15 cm above the floor. Most of the domestic range units operate at approx 55 decibels and for the flush of a toilet the motor will run for no more than 10 to 20 seconds. Learn More

Grid List

Set Ascending Direction

4 Item(s)